Muratec Series 41500E Fax dialing with programmable one-touch, Select Program No 73Delayed

Beyond the Basics

8	Press ENTER. The LCD shows:
		Enter Password
		_
	Note: If this box doesn’t have a password, press ENTER. Then skip to step 12.
9	Use the numeric keypad to enter the ITU-Tpassword for the box. Here, we’ve
	entered 654321:
		Enter Password
		654321_
	When finished, press ENTER.
10	If you want the transmission to begin immediately every time you press the
	key, press ENTER and skip to step 13.
	If you want to delay the transmission (perhaps to take advantage of lower
	phone rates), press COM-OPTIONS,ENTER.
11	Next, tell your fax to carry out this delayed command one of these ways:
	Option 1:		Perform the command once at a certain time on a certain day of
			the month. (For example, “Do this at 5:05 PM on the 30th.”)
			To select this option, use the numeric keypad to enter the date
			and time when the fax should perform the command:
				Delayed
				Enter Time: 30/17:05
	Option 2:
			Perform the command at a certain time each day you press the
			key. (For example, “Do this at 5:05 PM today.”)
			To select this option, use the numeric keypad to enter 0, 0 and
			then the time when the fax could perform the command:
				Delayed
				Enter Time: 00/17:05
12
	Press ENTER, ENTER.
13	The LCD now displays the next programmable one-touch key.
	If you do not want to enter or change any other key’s programming, press STOP

to return your machine to its usual standby mode.

If you do want to enter or change this key’s programming, go back to step 4. If you want to enter or change another key’s programming, go back to step 2.

Fax dialing with programmable one-touch

To dial a fax call using a programmable one-touch number:

1 Insert the document.

2 Make any necessary adjustments as usual.

3 Press the programmable one-touch key in which you’ve stored the fax commu- nication command.

Your fax will perform the operation now, or at whatever time you programmed.

Note: To review the details of each operation, review the instructions for that operation. See page 2.48 for a list of each operation and where to find it.

If you programmed this key to delay its operation, the LCD shows:

** Reserved ** Jan 29 2000 17:17

If you programmed this key to perform the operation immediately after you press it, the LCD shows the number:

9-1-972-555-4335

A4 Normal

Erasing a programmable one-touch key

1	Press /PROGRAM, C, 2, ENTER. The LCD shows the first programmable one-
	touch number that has been programmed:
		Select Program No.
		73:Delayed
	Note: If a one-touch number other than 73 appears, it means 73 is empty.

2 Press the programmable one-touch key you want to erase. Here, we’ve selected 75:

Select Program No. 75:Polling

3 To erase a different programmable one-touch key than the one that appears on the LCD, press that key now.

2.54