Muratec Series 41500E, MFX-1500E operating instructions Keys and their functions

Models: MFX-1500E Series 41500E

1 142
Download 142 pages 14.6 Kb
Page 16
Image 16
AUTO ANSWER light — Glows when auto-answer mode is active. In this mode, the machine answers automatically as a fax machine.
MEMORY RECEIVE light — Glows when the machine is receiving an incoming fax document into its electronic memory.
COMMUNICATION light — Glows when the fax machine is communicating with another machine.
REVIEW COMMANDS — Press to review pending fax commands or to view a brief description of delayed commands.

Getting started

The keys and their functions

Important: Some of the functions mentioned here are covered in the “Beyond the basics” section.

1

2

3

4

5 MONITOR/CALL — Turns the monitor speaker off or on. When it’s on, it allows you to hear the call you’re making. When using this feature, you can only hear the communication taking place. You cannot be heard unless you use a hand- set (optional). When sending a fax, this key also activates the call request feature.

6 ALARM light — Glows when a problem occurs during fax communication, printing or scanning. The light stays on until the machine prints a Check Message report.

7

PAPER JAM light — Glows when a printed page jams in your fax machine.

8

REPLACE PAPER light — Glows when the paper cassette is empty. See pages

 

1.10–1.11 for details on replacing paper.

9

Soft Keys — Shortcut keys. Any function that can be turned on or off can be

 

programmed into these three keys. If the light above one of these keys glows,

 

this indicates the setting that’s been programmed into it (see page 2.24) is

 

turned on. These keys are programmed at the factory to turn the following

 

functions on or off:

 

Soft key 1: STAMP — Press this key to set the machine to stamp each original

 

document or page automatically when the machine scans it successfully.

 

Soft key 2: REPORT — Press to turn the confirmation report feature on or off

 

for the next fax transmission.

 

Soft key 3: MEMORY TRANSMISSION — Selects which transmission mode your

 

fax machine uses, whether from memory or from the document feeder.

10

Numeric keypad — Just like the numeric keys on a regular tone-dialing

 

phone. Use these to dial phone and fax numbers and to enter numbers when

you’re setting up the machine.

1.4

Page 16
Image 16
Muratec Series 41500E, MFX-1500E operating instructions Keys and their functions