Muratec MFX-1500E, Series 41500E Sending a fax using monitor/call or a handset, … or …

START.

Faxing this way disables “V.34” mode and sends the fax in normal ITU-TGroup 3 fashion. This may slow transmission for this document. See page 3.20 for more information.

Insert the document to the ADF.

11 Now, everything is up to the machines — yours and the one you’re dialing. When it makes contact, your machine transmits the stored document from memory.

Important: If you want to cancel a transmission while scanning the docu- ment, press the STOP key.

If you want to cancel a transmission in progress, use the Review Commands function. See “Review Commands, an introduction” page 1.23.

12 At the end of the operation, your fax machine beeps and displays:

972-555-2009

** Complete **

Important: Whenever you transmit a document, what actually appears on the top line of the display depends on information stored in the remote fax. The line may even be blank.

Note: If the call fails, see “Redialing,” page 1.22.

Getting started

Sending a fax using monitor/call or a handset

You also can fax a document using either the monitor speaker or the optional handset to dial the call.

Note:

1

2 Adjust resolution and contrast if necessary. Press RESOLUTION to change the resolution. Press CONTRAST to change the contrast.

3 Obtain a dial tone, either by:

•Pressing MONITOR/CALL

… or …

•Lifting the optional handset. In either case, the LCD shows:

**Tel Mode **

_

4 Enter the fax number by using the numeric keypad.

Also, enter access codes with the number, just as for a regular phone call. Note: For information on one-touch and speed-dial numbers, see 2.8–2.14.

** Tel Mode ** 919725552009_

5 When you hear fax tones from the remote unit, press START.

Note: If a person answers the phone, use the optional handset to tell that person that you’re trying to send a fax. When you hear fax tones, press START.

6 If you’re using an optional handset, hang up after pressing

7 At the end of the operation, your fax machine beeps and displays:

972-555-2009

** Complete **

Note: If the call fails and you used MONITOR/CALL to dial, press MONITOR/CALL to hang up. Or if you’ve pressed START to begin the fax transmission, press STOP to end it.

Also see “Redialing manually,” next page, if the call fails.

1.21