Setting the Brightness of the Backlight
It is possible to change the brightness of the LCD panel's backlighting to more closely conform to the vehicle's interior lighting. This makes the screen easier to view.
NOTE
After carrying out the steps 1 to 3 of "Viewing the switching display modes" described on page 6, perform the operation shown below.
1 Press the SET UP button.
2 Press the 9 or 8 button within 10 seconds and select DIMMER.
3 Press the 4 or 3 button within 10 seconds to set the value.
AUTO:
Automatic adjustment of the screen brightness in conformity with vehicle interior brightness. HIGH:
Maximum screen brightness. LOW:
The preset screen brightness that was set when adjusting the minimum backlight level.
SET UP
AUX1
|
|
| 2 |
|
| DIMMER | AUTO | 3 | |
| DIMMER Lv. - |
| ||
|
|
| ||
| OPEN/CLOSE | OFF |
|
|
| OUT INT. | ON |
|
|
AUTO HIGH LOW
4 Press the SET UP button to finish adjustments.
Adjusting the Lowest Level of the Backlight
It is possible with this equipment to adjust the minimum brightness level for backlighting (LOW). This is useful, for matching the screen brightness to the dashboard for driving at night. This setting is recalled with the AUTO setting corresponding to the vehicle's interior lighting.
NOTE
After carrying out the steps 1 to 3 of "Viewing the switching display modes" described on page 6, perform the operation shown below.
1 Press the SET UP button.
2 Press the 9 or 8 button within 10 seconds and select DIMMER Lv.
3 Press the 4 or 3 button within 10 seconds to set the value.
SET UP
AUX1
| DIMMER | AUTO | 2 | 3 | |
| DIMMER Lv. - |
|
|
| |
|
|
|
| ||
| OPEN/CLOSE | OFF |
|
| |
| OUT INT. | ON |
|
| |
|
|
|
|
|
|
LOW | HIGH |
4 Press the SET UP button to finish adjustments.
Setting Automatic Opening/
Closing of Monitor
Simply turn the ignition key to ACC ON or OFF to | FR | |
automatically open or close the TV display. | ||
| ||
|
|
NOTE
After carrying out the steps 1 to 3 of "Viewing the switching display modes" described on page 6, perform the operation shown below.
1 Press the SET UP button.
ES
2 Press the 9 or 8 button within 10 seconds to select OPEN/CLOSE.
3 Press the 4 or 3 button within 10 seconds to set the value.
AUTO:
Automatic opening or closing of the display in DE depending upon whether the ignition switch is ON
or OFF. OFF:
Manual opening or closing of the display.
| SET UP |
|
| ||
| AUX1 |
|
| ||
|
|
|
|
|
|
| DIMMER | AUTO | 2 | 3 |
|
| DIMMER Lv. - |
|
| IT | |
|
|
| |||
| OPEN/CLOSE | OFF |
|
| |
| OUT INT. | ON |
|
| |
|
|
|
| ||
AUTO OFF 
4 Press the SET UP button to finish adjustments.
SE
