Alpine TME-M790 Selecting Rear Monitor, Setting the External Device Interrupt Mode, Link, Nav

Other Useful Features

9￿ 8 /￿ -

PWR SET UP V. SEL

Selecting Rear Monitor

This unit has controls to switch the video and audio to a rear monitor if another (rear) monitor is connected.

NOTE

After carrying out the steps 1 to 3 of "Viewing the switching display modes" described on page 6, perform the operation shown below.

1 Press the SET UP button.

2 Press the 9 or 8 button within 10 seconds and select AUX OUT.

3 Press the 4 or 3 button within 10 seconds to carry out selection.

LINK:

Output the video/audio portion shown on the main monitor, to the rear monitor.

NAV.:

Output the navigation video/audio to the rear monitor. (Only when navigation unit is connected). AUX 1:

Output the AUX 1 video/audio to the rear monitor. AUX 2:

Output the AUX 2 video/audio to the rear monitor.

SET UP

AUX1

BRIGHT	0	1
COLOR	0	3
TINT	0
AUX OUT	LINK

L I N K N A V . A U X 1 A U X 2

4 Press the SET UP button to finish adjustments.

Setting the External Device Interrupt Mode

When used in conjunction with an Ai interception box (KCA-801B), the sound of a TV or an external input sound can be intercepted to an Alpine head unit. This function may not work with some combinations of products. For details, refer to the KCA-801B’s operating instructions.

NOTE

After carrying out the steps 1 to 3 of "Viewing the switching display modes" described on page 6, perform the operation shown below.

1 Press the SET UP button.

2 Press the 9 or 8 button within 10 seconds and select OUT INT.

3 Press the 4 or 3 button within 10 seconds to turn ON.

SET UP

AUX1

DIMMER	AUTO	2
DIMMER Lv. -		3
OPEN/CLOSE	OFF
OUT INT.	ON
OFF ON

4 Press the SET UP button to finish adjustments.

10-EN