Planar PR9020 Color settings are not correctly adjusted, Color Space setting is not suitable

Troubleshooting

Phenomena that may be easily mistaken for machine defects (continued)

Phenomenon	Cases not involving a machine defect	Reference
		page
Video screen	The FREEZE function is working.	21
display freezes.	Press the FREEZE button to restore the screen to normal.
	Color settings are not correctly adjusted.	25, 27,
Colors have a	Perform picture adjustments by changing the COLOR
faded- out	TEMP, COLOR, TINT and/or COLOR SPACE settings,	31
appearance, or	using the menu functions.
Color tone is	COLOR SPACE setting is not suitable.
poor.	Change the COLOR SPACE setting to AUTO, RGB,	31
	SMPTE240, REC709 or REC601.
	The brightness and/or contrast are adjusted to an
	extremely low level.	25, 26
	Adjust BRIGHTNESS and/or CONTRAST settings to a
	higher level using the menu function.
Pictures appear	The WHISPER function is working.
dark.	Select NORMAL for the WHISPER item in the SETUP	25, 36
	menu.
	The lamp is approaching the end of its product
	lifetime.	60, 61
	Replace the lamp.
	Either the focus and/or horizontal phase settings are
	not properly adjusted.	19, 30
Pictures appear	Adjust the focus using the focus ring, and/or H PHASE
blurry.	using the menu function.
	The lens is dirty or misty.	65
	Clean the lens referring to the section “Caring for the lens”.
Pictures are	The exhaust ventilation holes at front is blocked by
	some objects.	4
trembling.
	Remove any objects from front side of the projector.

NOTE • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and it does not constitute or imply a machine defect.

71