Planar PR9020 NETWORK Menu continued, Description, Subnet, Mask, Setup, Server, Date, Time

NETWORK Menu

NETWORK Menu (continued)

Item		Description
		Use the ▲/▼/◄/► buttons to
		enter the IP ADDRESS. This
		function can only be used when
	IP	DHCP is set to OFF.
	ADDRESS	• The IP ADDRESS is the number that identifies this
		projector on the network. You cannot have two devices
		with the same IP ADDRESS on the same network.
		• The IP ADDRESS “0.0.0.0” is prohibited.
		Use the ▲/▼/◄/► buttons to
		enter the same SUBNET MASK
	SUBNET	used by your PC. This function
	MASK	can only be used when DHCP is
		set to OFF.
		• The SUBNET MASK ”0.0.0.0” is prohibited.
		Use the ▲/▼/◄/► buttons to
		enter the DEFAULT GATEWAY
	DEFAULT	(a node on a computer network
		that serves as an access point to
	GATEWAY	another network) address.
SETUP		This function can only be used when DHCP is set to
		OFF.
(continued)
		Use the ▲/▼/◄/► buttons to
	DNS	input the DNS server address. The
		DNS server is a system to control
	SERVER
		domain names and IP addresses
		on the Network.
		Use the ▲/▼ buttons to enter the
		TIME DIFFERENCE.
	TIME	Set the same TIME DIFFERENCE
		as the one set on your PC. If
	DIFFERENCE	unsure, consult your IT manager.
		Use the ◄ button to return to
		the menu after setting the TIME
		DIFFERENCE.
		Use the ▲/▼/◄/► buttons to
		enter the Year (last two digits),
	DATE	Month, Date, Hour and Minute.
	AND	• The projector will override this setting and retrieve
	TIME	DATE AND TIME information from the Time server
		when SNTP is enabled. ( Date/Time Settings of the
		User’s Manual - Network Guide)
(continued on next page)

56