Planar PR9020 user manual Image Menu, Phase, Size, Auto Adjust

IMAGE Menu

IMAGE Menu (continued)

Item

Description

	Using the ▲/▼ buttons adjusts the horizontal phase to eliminate flicker.
H PHASE	Right ó Left
	• This item can be selected only for an RGB signal or a component
	video signal. (except 525i (480i), 625i (576i), SCART RGB input
	from the COMPONENT port)
	Using the ▲/▼ buttons adjusts the horizontal size.
	Large ó Small
H SIZE	• This item can be selected only for an RGB signal.
	• When this adjustment is excessive, the picture may not be
	displayed correctly. In such a case, please reset the adjustment
	by pressing the RESET button on the remote control during this
	operation.
	Selecting this item performs the automatic adjustment feature.
	For an RGB signal
	The vertical position, the horizontal position and the horizontal
	phase will be automatically set to default.
	Make sure that the application window is set to its maximum size
	prior to attempting to use this feature. A dark picture may still be
	incorrectly adjusted. Use a bright picture when adjusting.
	For a video signal and s-video signal
	The video format best suited for the respective input signal will
	be selected automatically. This function is available only when
AUTO ADJUST	the AUTO is selected for the VIDEO FORMAT item in the INPUT
	menu (32). The vertical position and horizontal position will be
EXECUTE
	automatically set to the default.

For a component video signal

The vertical position, horizontal position and horizontal phase will be automatically set to the default.

•The automatic adjustment operation requires approx. 10 seconds.

Also please note that it may not function correctly with some input. When this function is performed for a video signal, a certain extra such as a line may appear outside a picture.

•The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (45).

30