NETWORK Menu
NETWORK Menu (continued)
Item | Description | |
| (1) Use the▲/▼ buttons on the NETWORK menu to select the | |
| PROJECTOR NAME menu and press the ► button. The | |
| PROJECTOR NAME dialog will be displayed. | |
| (2) The current PROJECTOR NAME | |
| will be displayed on the first 3 lines. | |
| If not yet written, the lines will be | |
| blank. | |
| Use the ▲/▼/◄/► buttons and | |
| the ENTER or INPUT button to | |
| select and enter characters. The | |
| RESET button can be used to | |
| erase 1 character at a time. Also if | |
| you move the cursor to DELETE or | |
| ALL CLEAR on screen and push | |
| the ENTER or INPUT button, 1 | |
| character or all characters will be | |
| erased. | |
PROJECTOR | The PROJECTOR NAME can be | |
input up to 64 characters. | ||
NAME | ||
(3) To change an already inserted | ||
| ||
| character, press the ▲/▼ button to | |
| move the cursor to one of the first 3 | |
| lines, and use the ◄/► buttons to | |
| move the cursor on the character | |
| to be changed. After pressing | |
| the ENTER or INPUT button, the | |
| character is selected. Then, follow | |
| the same procedure as described at | |
| the item (2) above. | |
| (4) To finish entering text, move the | |
| cursor to the SAVE on screen | |
| and press the ENTER or INPUT | |
| button. To revert to the previous | |
| PROJECTOR NAME without saving | |
| changes, move the cursor to the | |
| CANCEL on screen and press the | |
| ENTER or INPUT button. |
(continued on next page)
57
