Novatel DL-V3 Groupposave Configure Group Position Averaging, Groupsave Default Configuration

B.22 GROUPPOSAVE Configure Group Position Averaging

The groupposave command allows you to configure position averaging to commence when the group is executed. groupfixpos and groupposave configurations are mutually exclusive, and the last setting to be entered takes effect.

The groupposave set command configures the group for position-averaging with parameters set to maxtime, maxhorstd and maxverstd.

The groupposave clear and default commands clear the group position-average configuration.

Syntax

groupposave set groupname [maxtime [maxhorstd maxverstd]]

groupposave defaultclear groupname

B.22.1 Groupuse Translation

groupuse start

If position averaging is configured in the group, the posave command is executed with averaging time, maximum horizontal and vertical standard deviation set to the configured values.

groupuse stop

If position averaging is configured in the group, this command cancels it and issues a fix none command.

Message ID = 63

Field	Data	Value Used if	Bytes	Format	Units	Offset
		Not Specified
1	Header	-		-	-	0
2	Parameter Update, see Table 34 on	-	4	Enum	none	H
	Page 107
3	Group name	-	12	Char[]	none	H+4
4	Maximum time	0	8	Double	hours	H+16
5	Maximum horizontal standard deviation	0	8	Double	none	H+24
6	Maximum vertical standard deviation	0	8	Double	none	H+32

Table 41: GROUPSAVE Default Configuration

Parameter	Power-On		Freset	Stored in NVM
maxtime	no change	0.01		YES
maxhorstd	no change	0		YES
maxverstd	no change	0		YES

114 DL-V3 User Manual Rev 3