4.3.14 log, Syntax show Description | MicroNet Technology SP1659P

Syntax: show

<gateway> : 192.168.1.253 or others

Example:

SP1659P(ip)# set ip 192.168.1.2 255.255.255.0 192.168.1.253 set system IP address : 192.168.1.2

subnet mask : 255.255.255.0

default gateway : 192.168.1.253

show

Syntax: show

Description:

To display the system’s DHCP function state, IP address, subnet mask, default gateway, DNS mode, DNS server IP address and current IP address.

Argument: None

Possible value: None

Example:

SP1659P(ip)# show


DHCP	: Disable

IP Address	: 192.168.2.65

Subnet mask	: 255.255.255.0

Gateway	: 192.168.2.252

DNS Setting	: Manual

DNS Server	: 168.95.1.1

Current IP	: 192.168.2.65

4.3.14log

clear

Syntax: clear

Description: To clear the log data.

Argument: None.

Possible value: None.

Example:

SP1659P(log)# clear

disable auto-upload

Syntax: disable auto-upload

Description: To disable the auto-upload function.

Argument: None.

Possible value: None.

Example:

SP1659P(log)# disable auto-upload

enable auto-upload

Syntax: enable auto-upload

Description: To enable the auto-upload function.

Argument: None.

Possible value: None.

Example:

SP1659P(log)# enable auto-upload

89

Image 90

MicroNet Technology SP1659P 4.3.14 log, Syntax show Description, Syntax clear, disable auto-upload, enable auto-upload

Contents

PoE Management Switch User’s ManualModel No. SP1659P WEB-BASED USER INTERFACE INSTALLATIONINTRODUCTION Table of Content SPECIFICATION TEXT-BASED USER INTERFACE 1.1 Package Content 1.2 Key Features1. Introduction Operation 1.3 Physical DescriptionStatus 10/100M Port #1 - #24 2.2 Rack-mount Installation 2. Installation2.1 Installation without the Rack 2.3 Installing Network Cables 2.4 Installation of mini-GBIC module 2.5 Power Supply over Ethernet cable 3.1 Setting up Connection 3. Web-based User Interface 3.2 Web Management Overview 3.3 System 3.3.1 System Information 3.3.2 IP Configuration y DHCP Setting y IP address 3.3.3 Time Configurationy Subnet mask y Default gateway y DNS y Manual y NTPy Daylight Saving 3.3.4 Account Configuration 3.3.5 Management Policy y VID y Access Type3.3.6 Virtual Stack y IP Range 3.4 Port Configuration 3.4.1 Status y Link y Port Noy Media y State Tx Pause Connector TypeRx Pause Fiber Type Vendor OUI 3.4.2 ConfigurationBaud Rate Vendor Name Media type 3.4.3 Simple Countery Flow Control NWay 3.4.4 Detailed Counter 3.5 PoE 3.5.1 PoE StatusTx Broadcast Packets 3.5.2 PoE Configuration 3.6 SNMP y Get/Set/Trap Community 3.7 DHCP Booty SNMP y Trap 3.8 IGMP Snooping y IGMP snooping mode selection y IP Address 3.9 VLAN3.9.1 VLAN Mode y VLAN ID y SVL 3.9.2 Tag-based Groupy Symmetric Vlan y Double Tag y VLAN Name y Default Priority3.9.3 PVID y Member 3.9.4 Port-based Group y Drop Untag 3.10.2 Maintenance 3.10 MAC3.10.1 Information y Learning Limit 3.10.3 Staticy Aging Time y MAC y Forwarding RuleDrop Policy 3.10.4 MAC Aliasy Queue Priority y Port 3.11 GVRP 3.11.1 Configy GVRP State Setting address and alias name directly 3.11.2 GVRP Counter y Default Applicant Modey Default Registrar Mode y Normal 3.11.3 Group y Receivedy Transmitted 3.12.1 Status y Edit Administrative Control3.12 STP y Refresh y Root Path Cost 3.12.2 STP Configurationy Root Port y Current Max. Age y Forward Delay y Spanning Tree Protocoly Max. Age y Force Version y Port Status 3.12.3 STP Port Configurationy Configured Path Cost y Path Cost Status 3.13 Trunk y Admin Edge Porty Admin Point To Point y Priority 3.13.1 Trunk Port Setting / Status LACP y MethodNone Static y Member Ports 3.13.2 Aggregator Viewy Aggregator y Ready Ports y Key 3.14 802.1x Configuration3.13.3 LACP System Config y Trunk Status Authenticator Authentication serverSupplicant Page y Port Number 3.14.1 Statey Radius Server y Secret Key 3.14.3 Security y Disable Mode3.14.2 Mode y 802.1x Mode y Port Control y reAuthEnabledy 802.1x with Multihost mode y reAuthMax1-10 y serverTimeout1-65535 s 3.15 Alarmy suppTimeout1-65535 s 3.15.1 Event 3.15.2 Email/SMS y Email 3.16 Configuration 3.16.1 Save/Restorey SMS 3.17.1 Mirror 3.16.2 Config File3.17 Security y Export File Path 3.17.2 Isolated Group 3.17.3 Restricted Group 3.18 Bandwidth 3.18.1 Ingress3.18.2 Egress y Storm Type 3.19 QoS3.18.3 Storm y Storm Rate 3.19.1 Global 3.19.2 VIP 3.19.3 802.1p 3.19.4 D/T/R/M - Type ToS 3.19.5 DSCP 3.20.2 Loopback Test 3.20 Diagnostics3.20.1 Diagnostics 3.20.3 Ping 3.21 TFTP Server 3.22 Log 3.23 Firmware Upgrade 3.24 Reboot 3.25 Logout 4.1 Setup the Connection 4. Text-based User Interface 4.2.2 exit 4.2 Global Command4.2.1 end None Syntax help 4.2.3 help4.2.4 history Example Description 4.2.5 restore default4.2.6 restore user Possible value None Example 4.2.8 save user 4.3 Local Command4.3.1 set max-request set quiet-period set reAuthEnabledset port-control Syntax set serverTimeout set reAuthPeriodset state show mode set suppTimeoutset txPeriod show parameter show security show state show 4.3.2 accountmodify Syntax show del mail-address 4.3.3 alarmemail Possible value # 1 to Example events set Syntax show Syntax show 4.3.4 autologout4.3.5 bandwidth autologout set ingress-rate set storm-rate export user-conf 4.3.6 config-fileexport start import start set export-path 4.3.7 dhcp-bootset dhcp-boot set import-path 4.3.9 firmware set upgrade-path4.3.8 diag diag enable upgradedisable 4.3.10 gvrp Syntax set applicant range normalnon-participant set applicantDescription To set default applicant mode for each port. Argument range port range, syntax 1,5-7, available from 1 to set registrar set restricted Argument none Possible value none Example set timershow config show counter show group 4.3.11 hostname4.3.12 igmp-snooping hostname 4.3.13 ip disable dhcpenable dhcp set dns 4.3.14 log disable auto-uploadenable auto-upload Syntax show Description Syntax Upload 4.3.15 mac-tableupload alias Syntax Show informationsearch set aging set learning 4.3.16 Management static-macPossible value vid 1 to 4094 queue 0 to 3 rule 0 to 2 port 1 to Possible value none Example deleteSyntax delete # edit 4.3.17 poe set priority Example 4.3.18 port disable stateenable state clear counter show conf set speed-duplexPossible value range 1 to show detail-counter 4.3.19 qos disable 1qdisable dscp show simple-counter enable 1q disable qosdisable tos enable dscp set pri-tag enable tosset dscp set sche set vip DiffServ Queue DiffServ Queue DiffServ Queue DiffServ Queue Syntax reboot 4.3.20 rebootreboot 4.3.21 security Mirror 4.3.22 snmp Restricted GroupPossible value port0 to 4.3.23 stp MCheckPossible value range 1 to Example set config set port set version show configDescription To display the configuration of STP Possible value None set device-name 4.3.24 systemset contact set location set server 4.3.25 tftp4.3.26 time set daylightsaving Possible value hr -5 to +5 set manualset ntp set hash 4.3.27 trunkdel trunk Possible value method 0~2 Example show aggtr-view show lacp-configset trunk show lacp-detail 4.3.28 vlan del port-group namedel tag-group vid disable svl disable double-tagdisable drop-untag disable symmetric set port-group enable svlenable symmetric set pvid set tag-group 4.3.29 vs Syntax disableSyntax enable show pvid set gid set roleDescription To set role 5. Specification Key Features