Parameter description:

yRx Packets: The counting number of the packet received.

yRx Octets: Total received bytes.

yRx Errors: Number of bad packets received.

yRx Unicast Packets: Show the counting number of the received unicast packet.

yRx Broadcast Packets: Show the counting number of the received broadcast packet.

yRx Multicast Packets: Show the counting number of the received multicast packet.

yRx Pause Packets: Show the counting number of the received pause packet.

yTx Collisions: Number of collisions transmitting frames experienced.

yTx Single Collision: Number of frames transmitted that experienced exactly one collision.

yTx Multiple Collision: Number of frames transmitted that experienced more than one collision.

yTx Drop Packets: Number of frames dropped due to excessive collision, late collision, or frame aging.

yTx Deferred Transmit: Number of frames delayed to transmission due to the medium is busy.

yTx Late Collision: Number of times that a collision is detected later than 512 bit-times into the transmission of a frame.

yTx Excessive Collision: Number of frames that are not transmitted because the frame experienced

y y y y y y y y y y y y y y y y y y y y y

16 transmission attempts.

Packets 64 Octets: Number of 64-byte frames in good and bad packets received.

Packets 65-127 Octets: Number of 65 ~ 127-byte frames in good and bad packets received.

Packets 128-255 Octets: Number of 128 ~ 255-byte frames in good and bad packets received.

Packets 256-511 Octets: Number of 256 ~ 511-byte frames in good and bad packets received.

Packets 512-1023 Octets: Number of 512 ~ 1023-byte frames in good and bad packets received.

Packets 1024- 1522 Octets: Number of 1024-1522-byte frames in good and bad packets received.

Tx Packets: The counting number of the packet transmitted.

TX Octets: Total transmitted bytes.

Tx Unicast Packets: Show the counting number of the transmitted unicast packet.

Tx Broadcast Packets:

Show the counting number of the transmitted broadcast packet.

Tx Multicast Packets: Show the counting number of the transmitted multicast packet.

Tx Pause Packets: Show the counting number of the transmitted pause packet.

Rx FCS Errors: Number of bad FSC packets received.

Rx Alignment Errors: Number of Alignment errors packets received.

Rx Fragments: Number of short frames (< 64 bytes) with invalid CRC.

Rx Jabbers: Number of long frames(according tomax_length register) with invalid CRC.

Rx Drop Packets: Frames dropped due to the lack of receiving buffer.

Rx Undersize Packets: Number of short frames (<64 Bytes) with valid CRC.

Rx Oversize Packets: Number of long frames(according to max_length register) with valid CRC.

3.5 PoE

3.5.1PoE Status

Display the information about the PoE status.

21

Page 22
Image 22
MicroNet Technology SP1659P user manual 3.5 PoE, PoE Status, Tx Broadcast Packets