3.13.2Aggregator View
To display the current port trunk information from the aggregator point of view.
Parameter description:
yAggregator:
It shows the aggregator ID (from 1 to 26) of every port. In fact, every port is also an aggregator, and its own aggregator ID is the same as its own Port No.
yMethod:
Show the method a port uses to aggregate with other ports.
yMember Ports:
Show all member ports of an aggregator (port).
yReady Ports:
Show only the ready member ports within an aggregator (port).
Parameter description:
yActor:
The switch you are watching on.
yPartner:
The peer system from this aggregator’s view.
ySystem Priority:
Show the System Priority part of a system ID.
yMAC Address:
Show the MAC Address part of a system ID.
yPort:
Show the port number part of an LACP port ID.
43
