Panasonic CT-13R32C, CT-13R42C, CT-13R52D, CT-20R6C, CT-20G6D, CT-20D11D, CT-25G6C Specifications

Polarized plug

CONGRATULATIONS

Your new TV Monitor/Receiver features a solid state chassis that is designed to give you many years of enjoyment. It was thoroughly tested and tuned at the factory for best performance.

Customer Record

The model and serial number of this product may be found on the back of the unit. You should note the model and serial number in the space provided and retain as a permanent record of your purchase. This will aid in identification in the event of theft or loss.

Model

Number

Serial

Number

Care and Cleaning

Screen (Turn TV Off)

•Use a mild soap solution or window cleaner with a soft clean cloth. DO NOT USE ABRASIVE CLEANERS.

•Avoid excessive moisture and wipe dry.

Note: Do not spray any type of cleaning fluid directly on the screen.

Cabinet and Remote Control

•Use a soft cloth dampened with water or a mild detergent solution. Do not use benzene, thinner, or other petroleum based cleaners.

•Wipe dry with a soft, clean cloth. Avoid excessive moisture.

Specifications

Power Source
CT-13R32C	(0.9A)
CT-13R42C	(0.9A)
CT-13R52D	(0.9A)	120V AC, 60Hz
CT-20D11D	(1.4A)
CT-20G6D	(1.4A)
CT-20R6C	(1.3A)
CT-25G6C	(1.8A)
Channel Capability - 181		VHF-12;
		UHF-56;
		Cable-113
Video Input Jacks		1Vp-p, 75 Ohm,
(some models)		Phono Jack Type
Audio Input Jacks		500mV RMS
(some models)		47K Ohm
To Audio AMP Jack		0-2.0V RMS
(some models)		4.7K Ohm

Specifications are subject to change without notice or obligation.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel.

The lightning flash with			The	exclamation			point
arrow	head within	a	within a triangle is intended
triangle	is intended	to	to	tell	the	user	that
tell the user that parts			important		operating		and
inside the product are a			servicing instructions are in
risk of electric shock to			the	papers		with	the
persons.			appliance.

INSTALLATION

Television Location

Follow these recommendations before deciding the location of your television.

Avoid excessive sunlight or bright lights, including reflections.

Keep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure.

Fluorescent lighting may reduce Remote

rControl transmitting range.

Avoid magnetic equipment, including motors, fans, or external speakers.

CAUTION: Use this television receiver only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury from tip-over. In order to avoid injury to children, never place your television receiver on a piece of furniture that is capable of being tilted by a child leaning on it, pulling on it, standing on it, or climbing on it.

AC Power Supply Cord

CAUTION: TO PREVENT

ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT

OF AC OUTLET AND FULLY

INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT OR PINCHED, PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.

Optional Cable Connections

Shielded audio and video cables should be used between components. For best results:

•Use 75-ohm coaxial shielded cables.

•Use appropriate input and output connectors that match your component connectors.

•Avoid long cables to minimize interfer- ence.

Batteries

•Replace batteries in pairs.

•Do not mix battery types (zinc carbon with alkaline).

•Do not recharge, short-circuit, disassemble, heat, or burn used batteries.

Read these instructions completely before operating TV.

Contents are subject to change without notice or obligation.

WARNING: To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

- 2 -