Altinex manual ABOUT YOUR DA2000TM, Technical Specifications, Line Drivers

LINE DRIVERS

ABOUT YOUR DA2000TM 2

The DA2000TM is a computer video + stereo audio line driver designed for mounting under a table or to other surfaces in tight spots. Its extremely compact form promotes inconspicuous attachment, yet still allows for active components necessary to drive high-resolution computer signals a distance of up to 100 feet or more.

The DA2000TM offers a female VGA-type 15-pin HD input connector and a stereo audio mini jack on its front panel. The rear panel offers three terminal block connectors for the connection of RGBHV, balanced stereo audio and low voltage power (9V DC). This unit is compatible with VGA, SVGA, XGA, SXGA, UXGA, and QXGA signal formats.

The DA2000TM provides fully buffered, amplified outputs. Also, the DA2000TM converts an incoming unbalanced stereo audio signal to balanced stereo audio on the output.

ALTINEX offers optional adhesive A/V label sheets, allowing the inputs to be labeled as needed. All accessories, including the power adapter and the input cable, must be ordered separately.

TECHNICAL SPECIFICATIONS		3
FEATURES/DESCRIPTION	DA2000TM
GENERAL
Inputs
Computer Video Input	15-pin HD Female
Connector
Audio Input Connector	3.5mm stereo audio
Outputs
Video Output Connector	10-pin terminal block
Audio Output Connector	5-pin terminal block
Power
9VDC 500mA supply	2-pin terminal block

Compatibility

VGA/SVGA/XGA/UXGA MAC/SUN/SGI and other

analog computer video sources

Table 1. DA2000TM General

MECHANICAL	DA2000TM
Depth (inches)	4.1 in. (105mm)
Width (inches)	1.5 in (39mm)
Height (inches)	2.1 in. (54mm)
Weight (pounds)	1 lb. (.45kg)

Ship Weight (pounds)		1.6 lb. (.73kg)
Material		Steel
Finish		Black Zinc
Front Panel		White or Ivory
T° Operating		10°C -35°C
T° Maximum		50°C
Humidity		90% non-condensing
MTBF (calculations)		40,000 hrs.
Table 2. DA2000TM Mechanical
ELECTRICAL		DA2000TM
Input Video Signal
Level		1.7V max
Impedance		75 ± 1% (terminated)
Input Sync Signals
Horizontal & Vertical		TTL (+/-)
Impedance		10k Ohms
Output Video Signals
Level	1.7V p-p max (terminated)
Impedance		75Ohms
Equalization	Optimized for 75ft of high
		resolution coax
Output Sync Signals
Composite,		TTL (+/-)
Horizontal, & Vertical
Impedance		22Ohms
Frequency Compatibility
Horizontal		15-130kHz
Vertical		25-180Hz
Minimum Video		-3dB @ 350MHz
Bandwidth
Cross talk		-20dB @ 100MHz
Audio Input
Impedance		10k
Max Level		0dBu
Audio Throughput
Gain		+6dB balanced, 0dB
		unbalanced
Frequency Response	10Hz to 20kHz (+/- 0.05 dB)
Noise Floor		-98dB @ 20kHz
CMRR	<40dB, 10Hz to 20kHz
Audio Output
Impedance	50 unbalanced,100 balanced
Drive		>10dBu
Power
External Power		9VDC 500mA supply

Table 3. DA2000TM Electrical

3