yMode: Used for the activation or
yMonitoring Port: Set up the port for monitoring. Valid port is Port 1~26 and default is Port 1.
yMonitored Ingress Port: Set up the port for being monitored. It only monitors the packets received by the port you set up. Just tick the check box (;) beside the port x and valid port is Port 1~26.
yMonitored Egress Port: Set up the port for being monitored. It only monitors the packets transmitted by the port you set up. Just tick the check box (;) beside the port x and valid port is Port 1~26.
3.17.2Isolated Group
Isolated Group function can let the port be independent of other ports in the isolated group, and the communication is also forbidden between these ports. But, the ports of the isolated group are still able to communicate with the ports of the
Parameter description:
yMode: Used for the activation or
y Isolated Group: User can choose any port to be the member of this group. Just tick the check box ( ) beside the port x and valid port is Port 1~26. In this group, all of these member ports cannot forward packets with each other. Thus, the switch will not be capable of forwarding any packets in case its all ports become the members of the isolated group.
3.17.3Restricted Group
The function of the Restricted Group can decide the direction of transmitting packets for the specific port. The packets received by the port with the “Ingress” mode of Restricted Group will be sent to the ports with the “Egress” mode of Restricted Group.
Parameter description:
yMode: Used for the activation or
yIngress: Select the ports that you would like their Restricted Group to set into “Ingress” mode. Just tick the check box beside the port x and valid port is Port 1~26.
54
