
yKey:
Show the key value of the aggregator. The key value is determined by the LACP protocol entity and can’t be set through management.
yTrunk Status:
Show the trunk status of a single member
3.13.3LACP System Config
It is used to set the priority part of the LACP system ID. LACP will only aggregate together the ports whose peer link partners are all on a single system. Each system supports LACP will be assigned a globally unique System Identifier for this purpose. A system ID is a
Parameter description:
ySystem Priority:
The System Priority can be set by the user. Its range is from 1 to 65535. Default: 32768.
yHash Method:
DA+SA, DA and SA are three Hash methods offered for the Link Aggregation of the switch. Packets will decide the path to transmit according to the mode of Hash you choose.
Default: DA and SA
3.14 802.1x Configuration
802.1x
Before the devices or end stations can access the network resources through the ports under 802.1x control, the devices or end stations connected to a controlled port send the authentication request to the authenticator, the authenticator pass the request to the authentication server to authenticate and verify, and the server tell the authenticator if the request get the grant of authorization for the ports.
According to IEEE802.1x, there are three components implemented. They are Authenticator, Supplicant and Authentication server shown below.
44