MicroNet Technology SP1659P restore default, restore user, Description, save start, Argument None

11.ip

12.help

13.ip

14.history SP1659P(ip)# history 3 Command history:

13.ip

14.history

15.history 3

4.2.5restore default

Syntax: restore default

Description:

To restore the startup configuration as factory default configuration. If restoring default successfully, the CLI would prompt if reboot immediately or not. If you press Y or y, the system would reboot immediately; others would be back to the CLI system. After restoring default configuration, all the changes in the startup configuration would be lost. After rebooting, the entire startup configuration would reset to factory default. Argument: None

Possible value: None

Example:

SP1659P# restore default

Restoring ...

Restore Default Configuration Successfully

Press any key to reboot system.

4.2.6 restore user

Syntax: restore user

Description:

To restore the startup configuration as user defined configuration. If restoring default successfully, the CLI would prompt if reboot immediately or not. If you press Y or y, the system would reboot immediately; others would back to the CLI system. After restoring user-defined configuration, all the changes in the startup configuration would be lost. After rebooting, the entire startup configuration would replace as user defined one. Argument: None

Possible value: None

Example:

SP1659P# restore user

Restoring ...

Restore User Configuration Successfully

Press any key to reboot system.

4.2.7 save start

Syntax: save start

Description:

Save the current configuration as the start one. When you enter this command, the CLI would save your current configuration into the non-volatile FLASH. If you want the configuration still works after rebooting, save the configuration using the command ‘save stat’.

Argument: None.

68