Note: As the switch supports 802.3ad LACP (Link Aggregation Control Protocol) capability which up to 3 groups, to build up switch-to-switch connectivity with aggregation manner is provided.
2.4 Installation of mini-GBIC module
The switch provides 24 RJ-45 ports of 10/100/1000M and two mini-GBIC slots for fiber extension. Two mini-GBIC slots are respectively shared with RJ-45 port 23 & 24, but have higher priority than the two ports. If both RJ-45 port and mini-GBIC slot are in use, the mini-GBIC slot will be active and the RJ-45 port will be disabled and ignored.
The optional mini-GBIC modules are hot swappable, so you can plug or unplug it before or after powering on.
1.Verify that the mini-GBIC module is the right model and conforms to the chassis
2.Slide the module along the slot.
3.Be sure that the module is properly seated against the slot socket/connector
4.Install the media cable for network connection
2.5Power Supply over Ethernet cable
