Tftp, Time, Set server, Show, Example | MicroNet Technology SP1659P

4.3.25tftp

show

Syntax: show

Description: To display the basic information of the switch.

Argument: None

Possible value: None

Example:

SP1659P(system)# show

Model Name

: SP1659P

System Description

: 24+2G PoE Management Switch

Location

:

Contact

:

Device Name

: SP1659P

System Up Time

: 0 Days 18 Hours 50 Mins 57 Secs

Current Time

: Fri Sep 23 14:04:07 2005

BIOS Version

: v1.04

Firmware Version

: v0.92

Hardware-Mechanical Version

: v1.01-v1.01

Serial Number

: 031201000002

Host IP Address

: 61.219.198.203

Host MAC Address

: 00-11-3b-ee-00-01

Device Port

: UART * 1 TP *24 Fiber * 2

RAM Size

: 16 M

Flash Size

: 2 M

SP1659P(system)#

4.3.25tftp

set server

Syntax: set server <ip>

Description: To set up the IP address of tftp server.

Argument: <ip>: the IP address of tftp server

Possible value: <ip>: tftp server ip

Example:

SP1659P(tftp)# set server 192.168.3.111

show

Syntax: show

Description: To display the information of tftp server.

Argument: None

Possible value: None

Example:

SP1659P(tftp)# show

Tftp Server : 192.168.3.111

4.3.26time

set daylightsaving

Syntax: set daylightsaving <hr> <MM/DD/HH> <mm/dd/hh>

Description: To set up the daylight saving.

Argument:

hr: daylight saving hour, range: -5 to +5

111

Image 112

MicroNet Technology SP1659P user manual tftp, time, set server, set daylightsaving, Syntax show, Example, Argument

Contents

User’s Manual PoE Management SwitchModel No. SP1659P INSTALLATION INTRODUCTIONWEB-BASED USER INTERFACE Table of Content SPECIFICATION TEXT-BASED USER INTERFACE 1.2 Key Features 1.1 Package Content1. Introduction 1.3 Physical Description StatusOperation 10/100M Port #1 - #24 2. Installation 2.1 Installation without the Rack2.2 Rack-mount Installation 2.3 Installing Network Cables 2.4 Installation of mini-GBIC module 2.5 Power Supply over Ethernet cable 3.1 Setting up Connection 3. Web-based User Interface 3.2 Web Management Overview 3.3 System 3.3.1 System Information 3.3.2 IP Configuration y DHCP Setting 3.3.3 Time Configuration y Subnet mask y Default gatewayy IP address y DNS y NTP y Manualy Daylight Saving 3.3.4 Account Configuration 3.3.5 Management Policy y Access Type 3.3.6 Virtual Stacky VID y IP Range 3.4 Port Configuration 3.4.1 Status y Port No y Mediay Link y State Connector Type Rx PauseTx Pause Fiber Type 3.4.2 Configuration Baud RateVendor OUI Vendor Name 3.4.3 Simple Counter y Flow ControlMedia type NWay 3.4.4 Detailed Counter 3.5.1 PoE Status 3.5 PoETx Broadcast Packets 3.5.2 PoE Configuration 3.6 SNMP 3.7 DHCP Boot y SNMPy Get/Set/Trap Community y Trap 3.8 IGMP Snooping y IGMP snooping mode selection 3.9 VLAN 3.9.1 VLAN Modey IP Address y VLAN ID 3.9.2 Tag-based Group y Symmetric Vlany SVL y Double Tag y Default Priority 3.9.3 PVIDy VLAN Name y Member 3.9.4 Port-based Group y Drop Untag 3.10 MAC 3.10.2 Maintenance3.10.1 Information 3.10.3 Static y Aging Timey Learning Limit y MAC 3.10.4 MAC Alias y Queue Priorityy Forwarding RuleDrop Policy y Port 3.11.1 Config y GVRP State Setting3.11 GVRP address and alias name directly y Default Applicant Mode y Default Registrar Mode3.11.2 GVRP Counter y Normal y Received 3.11.3 Groupy Transmitted y Edit Administrative Control 3.12 STP3.12.1 Status y Refresh 3.12.2 STP Configuration y Root Porty Root Path Cost y Current Max. Age y Spanning Tree Protocol y Max. Agey Forward Delay y Force Version 3.12.3 STP Port Configuration y Configured Path Costy Port Status y Path Cost Status y Admin Edge Port y Admin Point To Point3.13 Trunk y Priority 3.13.1 Trunk Port Setting / Status y Method NoneLACP Static 3.13.2 Aggregator View y Aggregatory Member Ports y Ready Ports 3.14 802.1x Configuration 3.13.3 LACP System Configy Key y Trunk Status Authentication server AuthenticatorSupplicant Page 3.14.1 State y Radius Servery Port Number y Secret Key y Disable Mode 3.14.2 Mode3.14.3 Security y 802.1x Mode y reAuthEnabled y 802.1x with Multihost modey Port Control y reAuthMax1-10 3.15 Alarm y suppTimeout1-65535 sy serverTimeout1-65535 s 3.15.1 Event 3.15.2 Email/SMS y Email 3.16.1 Save/Restore 3.16 Configurationy SMS 3.16.2 Config File 3.17 Security3.17.1 Mirror y Export File Path 3.17.2 Isolated Group 3.17.3 Restricted Group 3.18.1 Ingress 3.18 Bandwidth3.18.2 Egress 3.19 QoS 3.18.3 Stormy Storm Type y Storm Rate 3.19.1 Global 3.19.2 VIP 3.19.3 802.1p 3.19.4 D/T/R/M - Type ToS 3.19.5 DSCP 3.20 Diagnostics 3.20.1 Diagnostics3.20.2 Loopback Test 3.20.3 Ping 3.21 TFTP Server 3.22 Log 3.23 Firmware Upgrade 3.24 Reboot 3.25 Logout 4.1 Setup the Connection 4. Text-based User Interface 4.2 Global Command 4.2.1 end4.2.2 exit None 4.2.3 help 4.2.4 historySyntax help Example 4.2.5 restore default 4.2.6 restore userDescription Possible value None Example 4.3 Local Command 4.3.14.2.8 save user set max-request set reAuthEnabled set port-controlset quiet-period Syntax set reAuthPeriod set serverTimeoutset state set suppTimeout set txPeriodshow mode show parameter show security show state 4.3.2 account modifyshow Syntax show 4.3.3 alarm emaildel mail-address Possible value # 1 to Example events set Syntax 4.3.4 autologout 4.3.5 bandwidthshow Syntax show autologout set ingress-rate set storm-rate 4.3.6 config-file export startexport user-conf import start 4.3.7 dhcp-boot set dhcp-bootset export-path set import-path set upgrade-path 4.3.8 diag4.3.9 firmware diag upgrade disableenable 4.3.10 gvrp set applicant Description To set default applicant mode for each port. ArgumentSyntax set applicant range normalnon-participant range port range, syntax 1,5-7, available from 1 to set registrar set restricted set timer show configArgument none Possible value none Example show counter 4.3.11 hostname 4.3.12 igmp-snoopingshow group hostname disable dhcp enable dhcp4.3.13 ip set dns disable auto-upload enable auto-upload4.3.14 log Syntax show Description 4.3.15 mac-table uploadSyntax Upload alias information searchSyntax Show set aging set learning static-mac 4.3.16 ManagementPossible value vid 1 to 4094 queue 0 to 3 rule 0 to 2 port 1 to delete Syntax delete #Possible value none Example edit 4.3.17 poe set priority set state disable state enable state4.3.18 port clear counter set speed-duplex Possible value range 1 toshow conf show detail-counter disable 1q disable dscp4.3.19 qos show simple-counter disable qos disable tosenable 1q enable dscp enable tos set dscpset pri-tag set sche set vip DiffServ Queue DiffServ Queue DiffServ Queue DiffServ Queue 4.3.20 reboot rebootSyntax reboot 4.3.21 security Mirror Restricted Group 4.3.22 snmpPossible value port0 to MCheck 4.3.23 stpPossible value range 1 to Example set config set port show config Description To display the configuration of STPset version Possible value None 4.3.24 system set contactset device-name set location 4.3.25 tftp 4.3.26 timeset server set daylightsaving set manual Possible value hr -5 to +5set ntp 4.3.27 trunk del trunkset hash Possible value method 0~2 Example show lacp-config set trunkshow aggtr-view show lacp-detail del port-group name 4.3.28 vlandel tag-group vid disable double-tag disable drop-untagdisable svl disable symmetric enable svl enable symmetricset port-group set pvid set tag-group Syntax disable Syntax enable4.3.29 vs show pvid set role set gidDescription To set role 5. Specification Key Features