Upgrading Your System 4-47
3. Slide the device completely out the front of the bay, and place on an
antistatic surface.
4. Place the drive in an antistatic wrapper.
5. If installing another device perform steps 7 through 15 of the previous
subsection Installing a 5 1/4-Inch Device, otherwise continue with the next
step.
6. When not installing another device, cover the empty bay by installing a
blank panel in the bay and securing it to the 5 1/4-inch device tray with four
screws, see Figure 4-51.
Figure 4-51. Installing a Blank Panel
7. Perform steps 11 through15 of the previous subsection Installing a 5 1/4-
Inch Device.
8. Remove the drive serial number from the equipment log.