5-14 Problem Solving
Table 5-1. Power On LCD Error Messages (continued)
Error Message Description Action
+3.3vs Alm 07 Voltage warning:
The power supply +3.3 VS is too high.
+3.3vs Alm 09 Voltage alarm:
The power supply +3.3 VS is too high.
+5.0v Alm 00 Voltage warning:
The power supply +5 V is too low.
+5.0v Alm 02 Voltage alarm:
The power supply +5 V is too low.
+5.0v Alm 07 Voltage warning:
The power supply +5 V is too high.
+5.0v Alm 09 Voltage alarm:
The power supply +5 V is too high.
Contact your service
representative to replace the power
supply or I/O riser card.
AC lost Alm 01 The power plug of power supply #1 is
not connected.
AC lost Alm 02 The power plug of power supply #2 is
not connected.
AC lost Alm 03 The power plug of power supply #3 is
not connected.
Connect the power cord. If the
same error still occurs, call your
service representative.
AmbientTempAlm00 Temperature warning: The ambient
temperature is too low.
AmbientTempAlm02 Temperature alarm: The ambient
temperature is too low.
AmbientTempAlm07 Temperature warning: The ambient
temperature is too high.
AmbientTempAlm09 Temperature alarm: The ambient
temperature is too high.
Stop the device, and check if the
device operating environment
temperature is appropriate. Also
confirm that the fans and
components are not clogged with
dust. If the system still detects an
abnormality, call your service
representative.
Chipset Err xxxx System error An error has been detected on the
baseboard or system I/O board.
Check if both boards are mounted
correctly. If the same error still
occurs when the boards are
mounted correctly, call your service
representative.
Cover Open The top cover or side cover is open. Close the top cover or side cover
firmly. If the same error still
occurs, call your service
representative.
CPU1 Temp Alm 00 Temperature warning:
The CPU #1 temperature is too low.
CPU1 Temp Alm 02 Temperature alarm:
The CPU #1 temperature is too low.
CPU1 Temp Alm 07 Temperature warning:
The CPU #1 temperature is too high.
CPU1 Temp Alm 09 Temperature alarm:
The CPU #1 temperature is too high.
Stop the device, and check if the
device operating environment
temperature is appropriate. Also
confirm that the fans and
components are not clogged with
dust. If the system still detects an
abnormality, call your service
representative.