NEC 5800/180Ra-7 manual Security Menu, Clear, Everyone

Security Menu

Note: Enabling the Supervisor Password field requires a password for entering Setup. The passwords are not case sensitive.

	Choices or
Feature	Display Only	Description	Your Setting
Supervisor	Clear	Status only, user cannot modify.
Password is		Once set, this can be disabled by
		setting it to a null string, or by
		clearing password jumper on
		system board (see System Board
		Jumpers in this Chapter).
User Password is	Clear	Status only, user cannot modify.
		Once set, this can be disabled by
		setting it to a null string, or by
		clearing password jumper on
		system board (see System Board
		Jumpers in this Chapter).
Set Supervisor	Press ENTER	Supervisor password (up to 7
Password		alphanumeric characters) controls
		access to the setup utility.
		When the <Enter> key is pressed,
		the user is prompted for a
		password; press ESC key to
		abort. Once set, this can be
		disabled by setting it to a null
		string, or by clearing password
		jumper on system board (refer to
		System Board Jumpers in this
		chapter).
		This feature is available only when
		you logged in the SETUP utility
		with the supervisor password.
Set User	Press ENTER	When the <Enter> key is pressed,
Password		the user is prompted for a
		password (up to 7 alphanumeric
		characters); press ESC key to
		abort. Once set, this can be
		disabled by setting it to a null
		string, or by clearing password
		jumper on system board (refer to
		System Board Jumpers in this
		chapter).
		With a user password, accessible
		SETUP menus are restricted. This
		feature is available only if the
		Supervisor Password is specified.
Password on Boot	Disabled	Disables or enables password
	Enabled	entry on boot.
Diskette Access	Everyone	Controls access to diskette drives.
Secure Mode	Supervisor

Configuring Your System 3-13