4-70 Upgrading Your System
A
B
Figure 4-77. Installing the Internal SCSI Cable
15.
Connect the secured internal SCSI cable to the option board. Verify that no
connector pins of the cable are bent. See Figure 4-78.
16.
Position the option board with its SCSI cable connector facing toward the
rear of the cabinet and insert the board into the slot. Ensure it is firmly
seated. See Figure 4-78, A.
17.
Secure the option board bracket to the power supply cage using the screw
removed in Step 4. See Figure Figure 4-78, B.
18.
Install the DEU top cover by following procedures previously described in
this chapter.
A
B
Figure 4-78. Install the 2-Channel SCSI Board