Setting Up the System 2-11
11.
Repeat steps 5 through 10 for the right side Rack Mounting Bracket
Assembly.
A – Vertical mounting rail
B – Rack mounting assembly
C – Alignment tab
D – Screw
Figure 2-7 Installing the Left Rack Mounting Bracket Assembly into the Rack
Mounting the BSU in the Rack Cabinet
Use the following procedure to mount the BSU into the rack cabinet (see Figure
2-8).
!
WARNING
Anchor the Rack Cabinet. The rack cabinet must be
anchored to an unmovable support or a front stabilizer to
prevent it from falling over when one or more units are
extended in front of it on slide assemblies. The anchors must
be able to withstand a force of up to 113 kg (250 lbs.). You
must also consider the weight of any other device installed in
the rack.
Avoid Injury. It is required that two people are present when
lifting and assembling the rack-mount BSU into a rack
cabinet.
Do not attempt to lift or move the server unit by the latches
on the power supplies.
1. Pull the two extension rail assemblies (see Figure 2-8) out of each rack
mounting assembly on the rack cabinet until it locks in place.