Upgrading Your System 4-53
BSU
ID0
ID1
DEU
ID0
ID1
ID2
ID3
IDB
IDA
ID9
ID8
Figure 4-58. Hard Disk Drive Bays
5. Grasp the handle of the hard disk’s carrier and unlock the lever located at the
bottom of the carrier handle, see Figure 4-59. The hard disk carrier will
come out approximately 1/2-inch so that its handle is fully accessible in
order to pull the carrier the rest of the way out of the bay.
Figure 4-59. Removing a Hard Disk Drive
6. Remove the hard disk drive and place it in an antistatic wrapper.
7. If another hard disk drive is not going to be installed into the vacant slot then
a cooling sponge must be. This will ensure proper system cooling.
8. Plug in the power cords and power up the system.