Upgrading Your System 4-37
Figure 4-41. Installing an Option Board
12.
If you installed a SCSI host adapter board, go to Appendix C, “Cabling,” for
procedures on cabling these boards into the system. For all other boards,
continue.
13.
Connect any external cables (if they are needed) to the installed option
board.
14.
Close the PCI expansion slot door.
15.
If tower-based system, reattach the top cover of the tower cabinet. See
Installing the Top Cover of the Tower Cabinet earlier in this chapter.
16.
Plug in the power cords and power up the system.
17.
Run the BIOS Setup.
18.
Select Yes for Reset Configuration Data in the Advanced Menu. Selecting
Yes updates the hardware configuration information.