Configuring Your System 3-7

Advanced Submenu
Feature
Choices or
Display Only Description Your Setting
Installed O/S Other
PnP O/S
Select the operating system
installed on your system that
will be used most of the time.
Note: An incorrect setting can
cause some operating systems
to display unexpected
behavior.
Reset Configuration Data No
Yes
Select Yes if you want to clear
the Extended System
Configuration Data (ESCD)
area. This parameter returns to
No after the system is started.
RomPilot Support Disabled
Enabled
Disables or enables RomPilot
support (including the remote
console and remote drive
functions during activation of
OS). The Boot-time diagnostic
screen is enabled if RomPilot
is enabled. (See Appendix B
for more details.)
Memory Reconfiguration Submenu
Feature
Choices or
Display Only Description Your Setting
DIMM Group #1 Status Normal* (Display Only)
DIMM Group #2 Status Normal* (Display Only)
DIMM Group #3 Status Normal* (Display Only)
DIMM Group #4 Status Normal* (Display Only)
Clear DIMM Errors Press ENTER Clears the DIMM group error
status information. Press the
Enter key to clear memory
error information whenever
you replace the failed memory
board.
DIMM Error Pause Enabled
Disabled
The POST operation pauses if
a DIMM error occurs.
*Possible Values: Normal, None, or Error (DIMM Row Error).