Configuring Your System 3-21Table 3-2 Adaptec SCSI Utility Setup Configurations
OPTION
RECOMMENDED SETTING
OR DISPLAY ONLY
YOUR
CONFIGURATION
SCSI Bus Interface Definitions
Host Adapter SCSI ID 7
SCSI Parity Checking Enabled
Host Adapter SCSI Termination Enabled
Additional Options
Boot Device Options Press ENTER for menu
Boot Channel A First
Boot SCSI ID 0
Boot LUN Number 0
SCSI Device Configuration Press ENTER for menu
Sync Transfer Rate (MB/Sec) 160
Initiate Wide Negotiation Yes
Enable Disconnection Yes
Send Start Unit Command Yes
Enable Write Back Cache No
BIOS Multiple LUN Support No 1
Include in BIOS Scan Yes 1
Advanced Configuration Options Press ENTER for menu.
Reset SCSI Bus at IC Initialization Enabled
Display <Ctrl-A> Messages During BIOS
Initialization
Enabled
Extended BIOS Translation for DOS
Drives >1 GByte
Enabled
Verbose/Silent Mode Verbose
Host Adapter BIOS (Configuration Utility
Reserves BIOS Space)
Enabled1
Domain Validation Enabled1
Support Removable Disks
Under BIOS as Fixed Disks
Disabled1, 2
BIOS Support for Bootable CD-ROM Enabled1
BIOS Support for Int13 Extensions Enabled1
1 No effect if BIOS is disabled.
2 Do not remove media from a removable media drive if it is under BIOS control.