Meridian America Link/Customer Controlled Routing manual Procedure 23 Configure printer ports

Chapter 16: Additional application configuration 513

Procedure 23: Configure printer ports

CCR supports eight ports, each of which can be configured for a terminal or a printer. Use this procedure to configure a port for a printer.

1At the ÒConsole Login:Ó prompt, type maint (if you are not already logged in). The default password is maint.

2At the Òmaint>Ó prompt, type portconfig and press [Return].

The port configuration menu appears.

Figure 282

Port configuration menu

CCR Port Configuration Utility

1:List Port Characteristics.

2:Change Port Characteristics.

Enter the number of the function you want to perform. (Hit the <RETURN> key to EXIT)

3Type 2 and press [Return] to change port characteristics.

Figure 283

Port number prompt

Enter PORT number (7 or 8):

4You are prompted to enter the port number. Type the number corresponding to the port you wish to change and press [Return].

Note: The number of ports displayed in Figure 283 depends on the number available. The example shown is for an IPE Module with co-resident CCR and Meridian Link.

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide