Meridian America Link/Customer Controlled Routing Disk-slicing table for 240-Mbyte disk drive

Chapter 14: Software installation, upgrade, and update procedures 443

Procedure 6: Load the operating system tape on an IPE Module or an Application Module with an MVME167 card (continued)

Figure 194

Disk-slicing table for 180-Mbyte disk drive

Phase 2. Configure Root And Usr File-Systems And Swap Area

Check the following slicing information for the root file systemÕs disk drive; indicate below whether you wish to modify this information:

slice	offset	sl size	fs size	fsname	vol-id	info
0	648	60000	60000	root	R3	1
1	60648	40000	0			1h8
2	100648	180000	180000	usr	R3	1
3	280648	71528	0			1h8
4	0	0	0			1h8
5	0	0	0			1h8
6	0	0	0			1h8
7	0	352176	0			1h8

---> Modify any of these parameters? (y, n, ?, q): [n]

Figure 195

Disk-slicing table for 240-Mbyte disk drive

Phase 2. Configure Root And Usr File-Systems And Swap Area

Check the following slicing information for the root file systemÕs disk drive; indicate below whether you wish to modify this information:

slice	offset	sl size	fs size	fsname	vol-id	info
0	648	60000	60000	root	R3	1
1	60648	40000	0			1h8
2	100648	378000	378000	usr	R3	1
3	478648	142	0			1h8
4	0	0	0			1h8
5	0	0	0			1h8
6	0	0	0			1h8
7	0	478800	0			1h8

---> Modify any of these parameters? (y, n, ?, q): [n]

24You are prompted to modify the parameters. Press [Return] to indicate that you donÕt wish to change any parameters.

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide