Meridian America Link/Customer Controlled Routing manual L0-1

190Chapter 9: Meridian Link/CCR interface cabling

8Move cable end H-3 from slot position L8-1 to slot position L7-3.

9Remove cable K from the backplane and connect cable ends K-1, K-2, and K-3 to slot positions L8-1, L8-2, and L8-3.

10Add cable L to the I/O panel by connecting cable ends L-1, L-2, and L-3 to slot positions L9-1, L9-2, and L9-3.

The backplane cabling should now be as shown in Table 65 and Figure 50. All slots are now ready to receive an IPE Module.

Table 65 lists cable connections for a fully expanded configuration. Figure 50 shows the backplane slots in a fully expanded configuration.

Table 65

NT8D11 cable connections (fully expanded configuration)

I/O panel connector	Backplane cable	Backplane slot
port	connector	position
A	A-1	L0-1
	A-2	L0-2
	A-3	L0-3
B	B-1	L1-1
	B-2	L1-2
	B-3	L1-3
C	C-1	L2-1
	C-2	L2-2
	C-3	L2-3
D (new cable)	D-1	L3-1
	D-2	L3-2
	D-3	L3-3
E	E-1	L4-1
	E-2	L4-2
	E-3	L4-3
F	F-1	L5-1
	F-2	L5-2
	F-3	L5-3

Ñ continued Ñ

553-3202-210 Standard October 1998