Meridian America Link/Customer Controlled Routing manual Idc Yes

Chapter 12: Meridian 1 configuration for Meridian Link/CCR 325

In order for DNIS to be used on Incoming Digit Conversion trunks, the trunk route must be configured to allow DNIS and IDC (Incoming Digit Conversion).

Table 118

LD 16ÑTrunk route administration

Prompt	Response	Comment
REQ	NEW, CHG	Add or change data
TYPE	RDB	Route data block
¥		Press [Return] until the DNIS prompt
¥		appears
¥
DNIS	YES	Allow Directory Number Identification
		System (DNIS) services
NDGT	1-(4)-31	Number of DNIS digits expected.
		X11 Release 20 through 22: 1-(4)-7
		X11 Release 23: 7, to program the feature
		of a seven-digit DNIS
		X11 Release 24: up to 31
¥		Press [Return] until the IDC prompt appears
¥
¥
IDC	YES	Allow Incoming Digit Conversion (IDC)
¥		Press [Return] until the REQ prompt
¥		appears
¥
REQ	END	Exit the overlay, saving changes to the route
		data block

The translation tables define which DNIS numbers are routed to which ACD DNs. Any range of numbers defined (indicated by Ò*Ó) must be contiguous. The beginning DNIS number and the last DNIS number in a range must have the same number of digits.

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide