Meridian America Link/Customer Controlled Routing manual

410Chapter 14: Software installation, upgrade, and update procedures

Procedure 3: Load application software from tape (continued)

Figure 139

Reboot messages 2

Copyright Motorola Inc. 1988 - 1992, All Rights Reserved

M4120 Debugger/Diagnostics Release Version 1.1 - 09/30/92 (IR01)

COLD Start

Local Memory Found =01000000 (&16777216)

MPU Clock Speed =25Mhz

Autoboot in progress... To abort hit <BREAK>

Booting from: M4120, Controller 0, Drive 0

Loading: Operating System

.	(diagnostic messages)
.

Initializing For Applications

Configure Link 0 : successful

Configure Link 1 : successful

Configure Link 2 : successful

Enable Link 0 : successful

Enable Link 1 : successful

Enable Link 2 : successful

Application release successful

Starting Applications

06/01/94 20:55:53 Starting CCR Application...

Starting Customer Controlled Routing Processes...

Performing modem reset...

Connected Sending atz

to the device. Done modem reset. The system is ready.

Console Login:

20Remove the application tape from the cassette tape drive.

The appearance of the ÒConsole Login:Ó prompt indicates that the new package is now installed. You may now log in to the system to perform other commands. You may also restore configuration files and data files from backup if necessary (Procedure 8: Restore configuration files and data files from the backup tape).

553-3202-210 Standard October 1998