Meridian America Link/Customer Controlled Routing manual Meridian Link protocol prompt

390Chapter 14: Software installation, upgrade, and update procedures

Procedure 1: Application configuration and start-up (continued)

Figure 101

Keycode prompt 4

Keycode group 4 (or Q or q to quit):

10You are prompted for the fourth group of keycode characters. Type the fourth group and press [Return].

Figure 102

Keycode prompt 5

Keycode group 5 (or Q or q to quit):

11You are prompted for the fifth group of keycode characters. Type the fifth group and press [Return].

A list of configured applications appears.

Note: Optional feature prompts will not appear if the features were not configured in the keycode. For example, if Meridian Link was not purchased, the prompts in Figures 103, 104, and 105 will not appear.

Figure 103

Meridian Link protocol prompt

Please enter the Meridian Link protocol, x for X.25, <cr> for TCP/IP):

12If you are activating the Meridian Link application, you are prompted to enter the Meridian Link protocol.

If you are using the X.25 protocol, type x, press [Return], then go to step 15.

If you are using the TCP/IP protocol, press [Return], then go to step 13.

553-3202-210 Standard October 1998