Meridian America Link/Customer Controlled Routing manual Keycode group 2 or Q or q to quit

Chapter 14: Software installation, upgrade, and update procedures 389

Procedure 1: Application configuration and start-up (continued)

Note: If you make a mistake while typing your Meridian ID or keycode, do not try to backspace and correct the error. Instead, continue until step 15, where you will be able to type n, press [Return] and return to step 6.

Note: Input for the Meridian ID is case sensitive; input for the keycode is not case sensitive.

Figure 98

Keycode prompt 1

Please enter your key code (5 groups of 4 characters each):

Keycode group 1 (or Q or q to quit):

7You are prompted to enter your keycode (Figure 98). Type the first four-character group of your keycode and press [Return].

Figure 99

Keycode prompt 2

Keycode group 2 (or Q or q to quit):

8You are prompted for the second group of keycode characters. Type the second group and press [Return].

Figure 100

Keycode prompt 3

Keycode group 3 (or Q or q to quit):

9You are prompted for the third group of keycode characters. Type the third group and press [Return].

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide