Meridian America Link/Customer Controlled Routing manual IP address prompt

464Chapter 14: Software installation, upgrade, and update procedures

Procedure 8: Load the application software from tape (continued)

16If you are activating the Meridian Link application, you are prompted to enter the Meridian Link protocol.

If you are using the X.25 protocol, type x, press [Return], then go to step 19.

If you are using the TCP/IP protocol, press [Return], then go to step 17.

Figure 238

IP address prompt

Meridian Link using a TCP/IP connection.

If you would like a default gateway IP address configured or changed, please enter the IP address in internet dot notation (e.g. 47.82.45.10). For no change enter <cr>:

17To configure or change a default gateway IP address, type the IP address in the decimal format and press [Return]. If no modification or configuration is required, simply press [Return].

Figure 239

Subnet mask prompt

Saving default gateway IP address:

If you would like a default subnet mask configured or changed,

please enter the subnet mask (e.g. 255.255.0.0). For no change enter <cr>:

18To configure or change a default subnet mask, type the subnet mask address in decimal format and press [Return]. If no modification or configuration is required, simply press [Return].

553-3202-210 Standard October 1998