Meridian America Link/Customer Controlled Routing manual Cden, Kls

342Chapter 12: Meridian 1 configuration for Meridian Link/CCR

Table 127

LD 11ÑDefine multi-line telephones as AST

Prompt	Response	Comment
REQ	NEW	Add new telephones
TYPE	aaa	Enter the telephone type as
		appropriate
TN	l s c u	Terminal number
CDEN	SD, (DD), 4D	Card density
CUST	0Ð99	Customer number
KLS	1Ð7	Number of key/lamp strips attached
¥		Press [Return] until the AST prompt
¥		appears
AST	00	DN key with AST telephone
		assignment (host controllable; up to
		two DN keys can be assigned as
		AST). This example shows that key
		0 is an AST DN.
IAPG	(0)Ð15*	AML link status message group,
		defined in LD 15. Since Group 0
		sends no messages, the default
		value is not normally used. Group 1
		(all messages) or a customer-
		designated group (2Ð15) would
		normally be used here.
¥		Press [Return] until the KEY prompt
¥		appears
¥

*Groups 10 through 15 are only available in X11 Release 17 or later software.

ÑcontinuedÑ

553-3202-210 Standard October 1998