Meridian America Link/Customer Controlled Routing manual BOS software management menu

420Chapter 14: Software installation, upgrade, and update procedures

Procedure 5: Load the operating system tape on an Application Module with an MVME147 card (continued)

ATTENTION

During the installation or start-up of BOS, different characters than usual represent the character delete, line delete, and interrupt functions. During these operations,

¥character delete (backspace), usually [Control-h], is [#]

¥line delete, usually [Control-u], is [@]

¥interrupt, usually [Control-c], is Delete

If you make a mistake entering the date, use [#] to delete characters. If you press [Delete], a Ò#Ó prompt appears; press [Control-d] to return to where you were.

19You are prompted to confirm the date you entered. Type y and press [Return] if the date is correct.

If the date is not correct, type n and press [Return]. You are then prompted to enter each value.

When you enter the date successfully and respond y to the prompt, the BOS software management menu appears.

Figure 155

BOS software management menu

The BOS (FE03.71) Software Management Menu

1	install	Install	FE03.71 BOS Software
2	upgrade	Upgrade	To FE03.71 BOS Software

---> Enter a number, a name, the initial part of name, or ? or <number>? for HELP, q to QUIT:

553-3202-210 Standard October 1998