Meridian America Link/Customer Controlled Routing manual End Ñ

Chapter 15: Link configuration 495

Procedure 14: Changing Meridian Link (link 1) parameters (continued)

Table 142

X.25 and LAPB parametersÑLink 1 (continued)

Link parameter	Allowed values	Description
	(defaults in parentheses)
T12	0Ð(1800)Ð9999	Amount of time (in 1/10 second
		increments) the AM will wait for an
		X.25 reset confirmation packet
		after sending an X.25 reset
		request packet to the host.
T13	0Ð(1800)Ð9999	Amount of time (in 1/10 second
		increments) the AM will wait for an
		X.25 clear confirmation packet
		after sending an X.25 clear
		request packet to the host.
T14	0Ð(600)Ð9999	Amount of time (in 1/10 second
		increments) the AM will wait for a
		packet with any P(R) value after
		sending an X.25 data packet to
		the host.
T15	0Ð(1500)Ð9999	Amount of time (in 1/10 second
		increments) the AM will wait for a
		packet with a P(R) value that
		acknowledges a transmitted X.25
		data packet to the host.
T16	0Ð(1300)Ð9999	Amount of time (in 1/10 second
		increments) the AM will wait for an
		X.25 interrupt confirmation packet
		after sending an X.25 interrupt
		request packet to the host.
Maximum T12 retries	0Ð(3)Ð9999	Maximum number of times the AM
		sends reset requests due to T12
		time outs.
Maximum T13 retries	0Ð(3)Ð9999	Maximum number of times the
		MLM sends clear requests due to
		T13 time outs.
	Ñ end Ñ

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide