Meridian America Link/Customer Controlled Routing manual Procedure 12 Verifying the link status

Chapter 15: Link configuration 483

Procedure 12: Verifying the link status

1Log in as mlusr (if you are not already logged in). The default password is mlusr.

2Type status link 0 and press [Return] to verify the status of the link to Meridian 1.

The response ÒLink 0: UpÓ indicates that the link is functioning properly. If you receive a different response, refer to the Application Module and Intelligent Peripheral Equipment Module Diagnostic and Maintenance Guide (NTP 553-3211-510).

3Meridian Link only

Type status link 1 and press [Return] to verify the status of the link to the host computer.

The response ÒLink 1: UpÓ indicates that the link is functioning properly. This message appears only if a host application is connected. If you receive a different response, refer to the

Application Module and Intelligent Peripheral Equipment Module Diagnostic and Maintenance Guide (NTP 553-3211-510).

4Meridian Link only

Type status link 2 and press [Return] to verify the status of the link to the host computer.

The response ÒLink 2: UpÓ indicates that the link is functioning properly. This message appears only if a host application is connected. If you receive a different response, refer to the

Application Module and Intelligent Peripheral Equipment Module Diagnostic and Maintenance Guide (NTP 553-3211-510).

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide