Meridian America Link/Customer Controlled Routing SP1 DCE, SP3 DCE, SP4 DCE, SP2 DCE

Chapter 8: Hardware installation procedures 133

Table 33

MVME705B jumper settings and cable connections

Serial port	DCE mode	DTE mode
SP1	On header K6, place jumpers over	On header K6, place jumpers over
	pins 3Ð4, 7Ð8, 9Ð10	pins 1Ð2, 5Ð6
	Plug the I/O cable into P14	Plug the I/O cable into P13
SP3	On header K5, place jumpers over	On header K5, place jumpers over
	pins 3Ð4, 7Ð8, 9Ð10	pins 1Ð2, 5Ð6
	Plug the I/O cable into P12	Plug the I/O cable into P11

¥Check the jumpers on the MVME712 transition card as indicated in Figure 36 (for MVME712AM), Figure 37 (for MVME712A) or Figure 38 (for MVME712M). Tables 34 through 36 show the default setups for the transition cards.

Table 34

Default DCE/DTE settings for MVME712AM transition card

Serial Port	Setting	Use
SP1	DCE	Console
SP2	Ñ	Internal Modem
SP3	DCE	Conshare
SP4	DCE	Meridian Mail Link (Meridian Link only)

Table 35

Default DCE/DTE settings for MVME712A transition card

Serial Port	Setting	Use
SP1	DCE	Console
SP2	DCE	External Modem
SP3	DCE	Conshare
SP4	DCE	Meridian Mail Link (Meridian Link only)

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide