Meridian America Link/Customer Controlled Routing LaserJet series II printer switch settings

Chapter 10: Installing peripheral devices 269

LaserJet series II printer switch settings

Use the [Menu] key on the front panel to check and set the options. Press the Menu key to access the first group of settings. Hold the [Menu] key down for about five seconds (the printer is offline) to access the second group of settings. Press the + or Ð (minus) key until the correct setting appears to change an option. Press [Enter]/[Reset Menu] to save a selection. Press the [Menu] key to continue. Press the [Online] key to exit from the menu.

Table 99 shows the correct option settings for use with CCR.

Table 99

LaserJet series II printer switch settings

Press [Menu] key to see the			Hold [Menu] key five seconds to
following function			see the following setting
COPIES	=	01	SYM SET	=	IBM - US
MANUAL FEED	=	OFF	AUTO CONT	=	OFF
FONT SOURCE	=	1	I/O	=	SERIAL
FONT NUMBER =		00	BAUD RATE	=	9600
FORM	=	066 LINES	ROBUST XON	=	ON
			DTR POLARITY	=	HI

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide