Meridian America Link/Customer Controlled Routing manual Meridian Link protocol prompt

Chapter 14: Software installation, upgrade, and update procedures 403

Procedure 3: Load application software from tape (continued)

Figure 124

Keycode prompt 3

Keycode group 3 (or Q or q to quit):

7You are prompted for the third group of keycode characters (Figure 124). Type the third group and press [Return].

Figure 125

Keycode prompt 4

Keycode group 4 (or Q or q to quit):

8You are prompted for the fourth group of keycode characters (Figure 125). Type the fourth group and press [Return].

Figure 126

Keycode prompt 5

Keycode group 5 (or Q or q to quit):

9You are prompted for the fifth group of keycode characters (Figure 126). Type the fifth group and press [Return].

A list of configured applications appears.

Note: Optional feature prompts will not appear if the features were not configured in the keycode. For example, if Meridian Link was not purchased, the prompts in Figures 127, 128, and 129 will not appear.

Figure 127

Meridian Link protocol prompt

Please enter the Meridian Link protocol, x for X.25, <cr> for TCP/IP):

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide