Meridian America Link/Customer Controlled Routing specification

Procedure 5: Load the operating system tape on an Application Module with an MVME147 card (continued)

26You are prompted to enter the user file system slice number. Press [Return] to use the default slice number (2).

Phase 2 of the BOS installation begins, and the slice table appears. Figures 162Ð165 show disk-slicing tables for four different drive types.

Figure 162

Disk-slicing table for 104-Mbyte disk drive

Phase 2. Configure Root And Usr File-Systems And Swap Area

Check the following slicing information for the root file systemÕs disk drive; indicate below whether you wish to modify this information:

---> Modify any of these parameters? (y, n, ?, q): [n]

Figure 163

Phase 2. Configure Root And Usr File-Systems And Swap Area

Check the following slicing information for the root file systemÕs disk drive; indicate below whether you wish to modify this information:

slice	offset	sl size	fs size	fsname	vol-id	K
0	648	60000	60000	root	R3	1
1	60648	40000	0			1
2	100648	180000	180000	usr R3		1
3	280648	54827	0			1
4	0	0	0			1
5	0	0	0			1
6	0	0	0			1
7	0	335475	0			1
---> Modify any of these parameters? (y, n, ?, q):					[n]