Meridian America Link/Customer Controlled Routing manual Loc Lic, Hoc Hic

494Chapter 15: Link configuration

Procedure 14: Changing Meridian Link (link 1) parameters (continued)

Table 142

X.25 and LAPB parametersÑLink 1 (continued)

Link parameter	Allowed values	Description
	(defaults in parentheses)
Lowest LCN*	(1)	Specifies the lowest X.25 virtual
		circuit number that will be assigned
		for an incoming or outgoing X.25 call
		request. Default value is 1.
Highest LCN*	(4095)	Specifies the highest X.25 virtual
		circuit number that will be assigned
		for an incoming or outgoing X.25 call
		request. Default value is 4095.
LOC LIC*	(-1)	Specifies the lowest X.25 virtual
		circuit number that will be assigned
		for an incoming (if DCE) or outgoing
		(if DTE) X.25 call request. Not used
		by the AM. Default value is Ð1.
HOC HIC*	(-1)	Specifies the highest X.25 virtual
		circuit number that will be assigned
		for an incoming (if DCE) or outgoing
		(if DTE) X.25 call request. Not used
		by the AM. Default value is Ð1.
T10	0Ð(1800)Ð9999	Amount of time (in 1/10 second
		increments) the AM will wait for an
		X.25 restart confirmation packet
		after sending an X.25 restart packet
		to the host.
T11	0Ð(2000)Ð9999	Amount of time (in 1/10 second
		increments) the host will wait for an
		X.25 call accept packet after
		sending an X.25 call request packet
		to the AM.
Note: Parameters marked with an asterisk (*) cannot be changed.
	Ñ continued Ñ

553-3202-210 Standard October 1998