Meridian America Link/Customer Controlled Routing manual Rstdata prompt, Stop applications prompt

Chapter 14: Software installation, upgrade, and update procedures 471

Procedure 9: Restore configuration files and data files from the backup tape

1At the ÒConsole Login:Ó prompt, type maint and press [Return].

2You are prompted for a password. Type the password and press [Return]. The default password is maint.

3At the Òmaint>Ó prompt, type rstdata and press [Return].

Prompts similar to the following appear:

Figure 250

Rstdata prompt

Make sure tape is in drive

When ready, enter ÔyÕ to continue, or ÔnÕ to quit: [y,n]

4You are prompted to prepare the tape drive. Insert the most recent backup tape for your application data.

Note: Wait until the tape indicator light turns off before proceeding to the next step.

5When the tape is ready, type y and press [Return].

Figure 251

Stop applications prompt

The restore will not succeed with an application running.

Enter ÔyÕ to stop the application(s) and continue, or ÔnÕ to quit: [y,n]

6If an application is not running, go to step 7. If an application is running, you will be prompted to stop all applications. Type y and press [Return].

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide