Meridian America Link/Customer Controlled Routing manual External I/O cables Application Module

Chapter 9: Meridian Link/CCR interface cabling 221

External I/O cables (Application Module)

Tables 78, 79, and 80 list external I/O cables that connect ports on the transition cards to connectors on either the I/O subpanel or the universal I/O panel. Table 78 lists external I/O cables that connect the I/O panel connectors to an SDI port, the ESDI/MSDL port, the main distribution frame (MDF), and consoles. Figure 60 shows the cables used between the transition cards, the I/O subpanel, and external equipment. Figure 61 shows the cables used between the transition cards, the universal I/O panel, and external equipment. Figure 63 shows the cables used between the transition cards, the generic I/O panel and external equipment. Figure 73 shows the cables going to the Meridian 1 or Meridian 1 I/O panel.

Table 78

Cables from transition cards to I/O subpanel (Application Module)

Part number	Length	Cable description and application
NT7D46AA	35 cm	9-pin (DB9) round subminiature D-style cable: connects port
(A0372653)	(14 in.)	3 (J4) on the MVME712A or AM transition card to the J8
		port
NT7D48AA	35 cm	25-pin (DB25) round subminiature D-style cable: connects
(A0372655)	(14 in.)	ports SP1 (ESDI port) and SP3 (host port) on
		the MVME705B transition card to J2 and J3
NT7D60AA*	35 cm	4-pin RJ11 to 9-pin subminiature D-style cable: connects the
(A0373962)	(14 in.)	built-in modem (teledapt connector) on the MVME712AM
(MVME712AM)		transition card to J9
NT7D61DA	35 cm	9-pin to 25-pin subminiature D-style cable: connects port
	(14 in.)	SP4 on the MVME712A/AM card to J1
NT7D79AA	35 cm	9-pin round subminiature D-style cable: connects port J1 on
(A0387839)	(14 in.)	the MVME712A or AM transition card to J7
NT7D95AA**	22 cm	25-pin flat subminiature D-style cable: connects SP1, SP2,
	(9 in.)	and SP3 on the NT6D51AA transition card to J4, J5, and J6

* When the MVME712A card is used, the NT7D60AA cable is replaced by an NT7D46AA cable, which connects port SP2 on the transition card to J9.

** Used only when NT6D51AA card is present (CCR Application Module).

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide