Meridian America Link/Customer Controlled Routing manual Personal computer running Reflection 4+

266Chapter 10: Installing peripheral devices

Personal computer running Reflection 4+

Reflection 4+ is a customer-supplied communications software package that runs on a personal computer, which can then be used as a terminal for accessing the Meridian Link and CCR applications.

To use Reflection 4+ on a PC, you must first download a configuration file. You need to perform this procedure only once, unless the configuration file is lost or becomes damaged. This procedure assumes that Reflection 4+ software is installed on your PC, and that the PC is connected to the appropriate port on the IPE Module or Application Module.

1Go to the PC directory you wish to use for all future access to the application (for example, the Reflection 4+ software directory).

2Type r4 and press [Enter] to start up the Reflection 4+ application.

The default Reflection 4+ configuration file starts up.

3Correct the port, baud rate, and data format information as appropriate for your PC, and press [Enter].

The Òlogin:Ó prompt appears.

4Type trmcnfg and press [Enter] to log in to the terminal configuration account.

5Type the trmcnfg password (the default password is trmcnfg) and press [Enter].

The menu shown in Figure 77 appears.

Figure 77

Downloading the Reflection 4+ configuration file

Choose a ÒReflectionsÓ configuration to install:

1.Enhanced keyboard, black background.

2.Enhanced keyboard, blue background.

3.AT keyboard, black background.

4.AT keyboard, blue background.

5.Quit configuration installation.

6Type the number for the appropriate menu option and press [Enter].

The file is downloaded into the directory on your PC.

553-3202-210 Standard October 1998