Meridian America Link/Customer Controlled Routing manual

538Chapter 19: Single Terminal Access

8Configure the MSDL port for STA. Define the port and its characteristics by responding to the following prompts in LD 17. Substitute the device number where ÒxÓ appears in the Response column.

Table 147

LD 17ÑConfigure MSDL port

Prompt	Response	Comment
REQ	CHG	Create or change information in the database
TYPE	CFN	Configuration record data block
ADAN	NEW TTY x	Add TTY with a logical ID x (0-15). The TTY
		number must be the same as the DNUM of
		the MSDL.
CTYP	MSDL	Card type is MSDL (automatic response)
GRP	0	Network Group Number (this prompt appears
		only for Option 81 systems)
DNUM	x	Device number; same as TTY (automatic
		response)
PORT	0	Admin port number (automatic response)
DES	STA_ADMIN	Designate port 0 for the STA terminal.
BPS	9600	Baud rate
PARY	NONE	Parity type
STOP	1	Number of stop bits
BITL	8	Data bit length
PARM	RS-232 DCE	Interface and transmission mode
FUNC	ABD FCL LME	MSDL card functions
USER	MTC SCH BUG	Output message types
XSM	NO	SDI port for the system monitor
TTYLOG	<cr>	Log buffer size

<cr> through remaining prompts

553-3202-210 Standard October 1998